How to Dry Laminate Flooring with Water Under It

Laminate floors are so beautiful to look at that homeowners are more attracted to it than wood. Only because of his interest in design, he took this multi-layered synthetic floor as his own.

Laminate floors are really nice to look at, and you can use them for a long time if you keep them away from water. There is no reason to worry if you see a little water on this type of floor. Water can also accumulate below its level, in which case you can quickly dry the water below the laminate floor.

How Laminate Floor Water Damage Occurs?

There is no reason to panic when you see water spilt on the laminate floor, just as you need to solve all these problems, you also need to know the cause of this damage.

How to Dry Laminate Flooring with Water Under It

If you have a laminate floor, you should be prepared in advance to deal with these situations. It will be straightforward to clean as long as the water stays on the floorboard, but if water enters the planks of the floorboard, it can be damaged. The protective layer of your laminate floor will try to protect it from damage. Even then, if water enters the floorboard gap, the fiberboard core area will get wet, causing the laminate floor to swell.

If you have ever used particle boards, you can see from their wet condition that they swell and swell. Tables and bookcases made of such boards are usually used in such situations when they are wet. Not just particleboard, this happens with your floorboard. If a large amount of water can enter the board’s seams, the core of the board gets wet with moisture. If you notice water bubbles on your laminate floor, then you know that the cause of this damage is water, water has damaged your laminate floor. Water will definitely inflate and crack your floorboard, which will develop it into a painful bending condition.
Read More..
How to Fix Laminate Flooring That is Lifting?
How to Clean Waterproof Laminate Floors
Can You Use a Steam Mop on Laminate Floors?

How to dry Laminate Flooring with water under it?

Although laminate floors are built on a level basis, its sections have an interlock system. So it is not difficult to clean, it can be quickly protected from any kind of water. Wet areas should be identified and then dried. Once the wet part has dried, the damaged areas need to be removed, then new sections need to be replaced in that area. However, this work can never be done in a wet condition, you must make sure that your laminate floor is completely dry.

If a minimal amount of water gets leaked through the edges of the laminate floor, you can drain it with the help of quarter round shoe molding or baseboards. Pull them around the house; it can be beneficial. If the water is not very wide, you can also use a wet-dry vacuum to drain your laminate floor. Be careful, and the water should be removed as soon as it goes under the laminate floor. You will then need to remove the damaged parts of your floor and dry the floor as quickly as possible. That is because the underlayment of the flooring foam must be damaged if the water stays under the floor for a long time.

Wet areas need to be cleaned very well so that not a drop of water remains on the floor surface. You need to find the source of the moisture, repair it so that it does not happen again. All uninterrupted floors and subfloors attached to it need to be dried, a heater or hair dryer may be useful for this purpose.

Remember, unless the laminate floor is removed from a wet surface, it can never be dried. If you do such foolish things, the harm will outweigh the benefits. Once the structural damage to the floorboard is done, you will not find any other way but to replace all the laminate floors. You don’t have to be a skilled plumber to do this, but you do know how water can damage this type of floor and how to dry it safely.

Special Tips: – When all the water is clear, if the floor is still wet, then the floor surface should be left exposed for some time. You can place a passionate fan on the floor to dry quickly. Saws may be needed to remove damaged floor sections so that a larger size saw can be collected in advance. Also, a hammer and chisel will benefit you, and these will help you to remove the damaged parts without further damage. You can use sharp edges to scrape the soft parts of the floor. Check again at the end of the work in each area, to see if each part looks fit.

When should your laminate floor be replaced?

When you see the harmful effects of water on your laminate floor, you will have no choice but to replace the damaged floorboards. This is because once the laminate floorboards have been damaged by water, no alternative solution has been found to replace them, even if it is sanded. Even after you dry it, its surface will look dry, but bubbles will continue to come out due to the water inside it. However, the advantage of using the laminate floor is that it can easily cover wet areas, making it easier to remove and dry those affected areas, so it can be re-installed later.

The planks of the laminate floor become very swollen due to excessive wetting. What else can you do without replacement? Due to the interlocking design of such floorboards, such floors can be dragged away. When the floors are purchased, they are purchased according to the package. As a result, some extra planks remain in the room, which can later be replaced by removing the damaged floorboards. However, if you do not have such an option, you will need to collect new planks.

Conclusion

We take care of the floors, to make it look aesthetic and to increase its durability. Since laminate floors are prepared at high heat and extreme pressure, it is even more challenging than wood as an alternative. Originally made of melamine resin and aluminum oxide, this floor cannot be damaged or degraded by ordinary moisture. However, if the water in its planks goes away and stays for a long time, it will cause the floorboard to swell. You can be sure that your laminate floor has been damaged by water. How to dry water under your laminate floor?  Of course, you know the answer. Hopefully, this article of mine will show you the way out of that frustrating situation.

3 thoughts on “How to Dry Laminate Flooring with Water Under It”

  1. water ran under and over our laminate flooring area about 20′ long x about 12′ wide and into a hallway moisture reading is at 101% , cupping on edges more at ends than on side is it possible dry and return normal condition or does it need to be replaced, how would you dry it . A fan and dehumidifier has been running for 2 day no sign of decrease in condition

    1. Any laminate that shows any indication that it MIGHT have gotten wet needs to be replaced. And also you could probably spray a mold growth inhibitor (or even some dilute bleach) in wet laminate areas.

Leave a Comment

Your email address will not be published.