Over time, using a stump grinding machine to remove the stump from the trees has proven to be the most effective method. However, before using a stump grinding machine make sure that the stump grinder teeth are in the ideal position for cutting anytime you wish to use it. This will make the experience more enjoyable and improve its performance.
The machine, however, will be unable to properly cut the stump if these teeth get dull. It can damage the stump grinder if it is not carefully removed, and it can even cause serious injury to you. As a result, keep the stump grinder teeth sharpened at all times for your own benefit. This article will teach you how to sharpen the teeth on your stump grinder.
It’s worth noting that without human assistance, the stump will always degrade, emphasizing the significance of maintaining its sharpness. Make sure that the more you sharpen your stump grinder teeth appropriately, the better your stump cutting experience will be.
More on LivingProofMag
Cut-Off Tool vs Angle Grinder
Why is My Shop Vac Blowing Out Dust
Echo vs Stihl Chainsaw
Contents
How to Sharpen Stump Grinder Teeth
Tools you need to get the action set
These include the bench grinder, the Drill Press, drill chuck in the drill press, plywood, dead weight, and diamond wheel(s) (also known as the green wheel).
1. Ensure the Spark is removed from the stump grinder
Whenever you decide on sharpening your stump grinder teeth, ensure the spark plug is removed from the stump grinder. This is to help you stay safe during the stump grinding process and to strictly avoid any strange accident whatsoever. When you adhere to this, you do not have to worry about anyone unconsciously putting the stump grinder on while you are working on getting the teeth sharpened.
2. Detaching the Teeth from the Grinder
You must remove the teeth on the stump grinder from it in order to make the sharpening process more convenient and to experience an easy flow of the sharpening of the stump grinder teeth.
Using the sets of screws that match the nuts inserted into the stump grinder, you can detach the teeth from the stump grinder.
Keep in mind that these teeth are linked to the blade of the stump grinder, so use a suitable screwdriver to carefully release the tooth from the blade. If you need to get a lot done with the stump grinder quickly, obtaining an extra set of teeth sharpened is a good idea.
3. Get your workspace Ready
You must take particular measures when attempting to sharpen your stump grinder. Especially in the workstation that you have chosen. Ensure that the work surface is clean and clear of trash and filth. This must be meticulously followed, as even the tiniest particles might catch fire due to the sharp sharks produced by metal grinding. All flammable liquids should be kept out of the area.
4. Set up your Stump Grinder and follow these processes through
- Cut the plywood to a befitting size. Make sure the base of the bench grinder is not larger than it.
- Ensure you scale the bench grinder to the plywood already cut, and mount it closer to the drill press table.
- Setting one of the plates on the stump grinder to an angle of 120 degrees, turn on the stump grinder. Make sure it is properly placed to grind the shank of the tooth. Carry on in this manner until you reach the carbide.
- Remove the tooth continually from the grinder to cool off in the water.
After this process, you will need to move to use the diamond wheel which will grind the carbide to the tooth (often called the green wheel).
- Scale the diamond wheel(s) on the bench grinder you are using, tightening it (them) down. Source for the dead weight weighing about over 1kg or more. Get a rope and tie an end to the dead weight and the other end to one of the handles of the drill press you are using. For easy usage, place the plate’s surface at 90 degrees. Grind the carbide tooth gradually, but do not allow it to touch the shank.
- Keep close eyes on how the thing is getting by to have a clear understanding of these processes, how the machine works, and the time it takes to get a tooth sharpened. If done properly, you would realize that it takes less than a minute to get a tooth to sharpen.
5. Blow off the dust and get it cleaned
Immediately you are done sharpening all the stump grinder teeth, make sure you get them blown with compressed air and clean them off for storage. This is to guarantee that any metal dust and debris are removed completely. When you are done, finetune them with a light coating of the machine oil. This is mainly to prevent them from getting rust while getting them ready for storage.
Safety Measures to adopt while sharpening
Stump grinding can be enjoyable, but if done incorrectly, it can result in a life-threatening situation; therefore, make sure to follow these safety precautions. They are as follows:
- It is necessary to wear protective gear such as safety google, hard hats, gloves, and long sleeves, among others. When you are in the work area, keep your hair short, avoid wearing jewelry, and wear loose clothing.
- Try to set a boundary around the area you are planning on working. This is to ensure safety and also to keep others safe as well.
- Always remember to remove items that are flammable from the work area to ensure your safety.
- Do not rush the process through, take the stump grinding process one step at a time to ensure you are doing things rightly.
Conclusion
Having your stump grinder teeth sharpened properly on a regular basis will extend the life of your machine. Its finest performance also makes it faster and more comfortable to cut stumps with.
If this is your first time sharpening your stump grinder teeth, make sure you understand the operation or the suggested sharpening methods and follow all safety precautions.