How to Dry Wet Carpet Without Vacuum

Almost every other person I met has this wrong conception that it is not possible to dry a wet carpet without a cleaner. But is it impossible? Well, even if you don’t have a vacuum cleaner, you will be able to dry wet a completely soaked carpet just fine.

It is natural to feel overwhelmed as it is not always possible to hang a wet carpet outside, or maybe you are dealing with a carpet piece that is too large to remove. So you have no other option to dry it in place. But if you don’t know how to dry wet a carpet without vacuum, here are some tried and tested methods that will work almost every time for you.

How to Dry Wet Carpet Without Vacuum

How to Dry Wet Carpet Without Vacuum

The key to dry wet carpet without vacuum efficiently is to get to the area where it is most affected or wet right away. Then the actual work begins. But your primary aim will be removing as much water and moisture in the quickest time possible.

Step 1: Use a Carpet Sweeper and towel

But how does a carpet sweeper and towel can help you to dry wet a carpet without a vacuum? Well, it turns out that there are specific carpet sweepers that are made with brushes that are perfect for pulling out moisture. They are made for cleaning dirt and debris. They work surprisingly well to get rid of trapped moisture into the carpet fibers. Although you might still need to do some blowing with a fan or an industrial blower, if you have one, these carpet sweepers can provide excellent results too.

Use them sparing with towels, and you are likely to see some outstanding results. Towels or rugs are a great way to get rid of moisture of a wet carpet. So use them combined and make sure not to use the carpet sweeper too hard on the carpets. Using carpet sweeper too roughly on the carper can result in damaging the fibers.

Step 2: Use an  industrial air blower or a fan

Make sure to use an industrial blower for a faster result on the carpet. But if you don’t, then you can use a fan as well. Please turn it on and direct the air onto the carpet for faster drying.

Step 3: Use baking soda

If you use baking soda on a wet carpet, it can do wonders to get rid of all the excess moisture and also dry the carpet much faster. So at the very beginning, you need to get rid of as much water as you can by using a carpet sweeper. So as you get rid of the water, the carpet will become a little less soaked and quite close to being dry. But it isn’t dry yet, so you need to get the baking soda into action. Pour as much baking soda as required for the particular area you need to be covered in your carpet.

Wait a bit

Now you don’t have anything to do other than waiting for a few hours. Do keep in mind that it can take even as much as 12-15 hours. But the baking soda will surely get rid of the moisture and also prevent mildews from forming as well. Now, after the baking soda is properly soaked inside the carpet fibers, blow the carpet with a fan.

Step 4: turn on the dehumidifier.

Yes,  using a dehumidifier is one of the best way. It is yet comparatively less known secrets of getting to dry wet the carpet without a vacuum cleaner. After you are done with the above-mentioned steps, make sure to turn on the dehumidifier. It will help you get rid of the moisture struck inside much quickly.

How to prevent molds and odor on a wet carpet

Get a mixture of hydrogen peroxide and water. Make sure to keep them in a  50:50 mixture ratio. Now put that into a bowl. Once you’ve got two combined into the bowl, now dab it in the area that is affected by the water most. This is going to help draw out any mildew that’s growing in the carpeted fibers. Now leave it for 30 minutes and then reapply it again. Now take the baking soda and sprinkle it onto the area. This will help to absorb extra moisture and prevent odors. If you notice that the area still smells, you can put out a bowl of white vinegar. Vinegar is excellent for preventing odors.

More on LivingProofMag

How to Remove Wrinkles Out of Carpet without a Stretcher
Best Way of Killing Hookworms in Carpet

Conclusion

As you can see, it is not too hard to get rid of water and dry wet a carpet even without a vacuum. You can get it as dry as a brick in a few hours, only using a few household items. So do make sure to follow the steps we have provided you here about how to dry wet a carpet without vacuum. Using a carpet cleaner makes the job more easier.

Leave a Comment

Your email address will not be published.