Ceramic tiles have their level of stardom while implemented on modern floors. They are very popular for their subtle beauty, hard durability along with easier flexibility. But grout stains can make your ceramic tiles experience goes wrong.
Without grout, there is no suitable way to attach the tiles to the floor or wall. All flooring installers have to try grout to join tiles with the floor. But the ultimate problem is while grout stains start appearing.
Rust can be another hassle to face mostly. Most of the time rush occurs due to the tiles getting in contact with the water. But sometimes metal or wooden furniture can raise the attention of yours of spreading rust on the tiles. And after a certain time, you’ll notice a strong persistent stain.
So, this is our guideline where I’ll be discussing all the possible and easier ways on how to remove rust stains from tile and grout.
There are a lot of products, chemical solutions, and home remedies to try for solving grout and rust stains.
7 Effective Ways to Remove Rust Stains from Tile & Grout
You don’t need a helping hand or any special expert’s support to follow any of our remedies. So, without any further ado jump to the remedy section.
“[Tip: Before you try any of the remedies, please wear a pair of gloves made of latex or rubber. It will keep your hand safe]”
Lemon is itself a savior for hair, skin, health, and many household chores. Its citric acid is known to lighten the marks or stains from things.
Squeeze out some lemon juice and store them in a mixing bowl. Make sure the quantity of lemon juice depends on the area measurements. Now, add some borax and make a paste. The quantity of lemon juice and borax should be 1:1.
You can also use baking soda instead of borax. Now, apply this paste to the stains. If the rust is too deep to remove easily then let it rest for 1 hour to 2 hours. Otherwise, 30 minutes is enough. If the mixture becomes dry, spray some lemon juice or water on it to keep it wet letting work even finer.
After a certain time, scrub the tiles with a scrubber and wash them off away with water.
2. Hydrogen Peroxide
Hydrogen peroxide is a known thing for fixing many problems. So, every home must own it. Mix up hydrogen peroxide and tartar cream following a 3:2 ratio. And apply the solution to the stained area and leave it for 1-2 hours. And scrub it with a stiff bristle brush. Wash away with water and the result will be amazing.
3. Laundry Detergent
Laundry detergent has a lot of good properties to keep your clothes cleaner and healthier. And it’s a good choice for clearing off stains from sink, clothes, any kind of floor tiles, or furniture.
Mix laundry detergent with plain water or vinegar. Apply the mixture to the tiles, and scrub with a scrubber. Let it sit for 1 to 2 hours. Make sure it doesn’t get dry. Spray some water if it gets dried off. You can repeat this several times until you get any desired result. Make sure to clean with water finely and wipe the place with a dry cloth.
4. Dish Washing Liquid
Who doesn’t own dish liquid gel in their kitchen? Everyone owns! It works efficiently for removing stains from tiles.
Take a spray bottle, fill it with 1 cup of warm water and 2 tablespoons of liquid dish detergent. Shake the bottle to mix it well.
Spray it directly onto the stains. Let it stay there for 30 minutes at least. Then with the help of a sponge or scrubber brush scrub the affected area. Keep scrubbing for a longer time if the rust is persistent.
Wash off with running water and keep repeating if the result isn’t satisfying.
5. Baking Soda
Baking soda is a known food element. It’s found in every home. And it contains some bleaching properties to deal with stains and marks easily.
First of all, spray some water on the affected area and spread baking soda on the stains. Let the mixture rest for 30 minutes or more if the grout is too old.
Take a scrubber, dip that into the solution of the liquid dish, and scrub them onto the stains. Wash it off with running water and wipe with a dry towel.
6. Pumice Stone
Pumice stone is a promising material to remove old and very stubborn stains from grout or rust. While you want to get rid of those stains faster and easier then pumice stone scrubbing is the best way.
7. Commercial Cleaner:
The commercial cleaner is the best way if you don’t want to go through the hassles of home remedies.
RMR-86 Instant Mold and Mildew Stain Remover Spray can be the ultimate solution for getting rid of unwanted persistent stains of the mold, rust, and grout of the tiles. It doesn’t require any scrubbing issue. You can use every kind of tiles, bathtub, drywall, concrete floor, also for bathroom and kitchen tiles.
Skylarlife Grout Silicone Caulk Whitener is an easy peasy lemon squeezy kind of solution to solve the stain issue. All you need is to apply it to the affected area for 6-8 hours. And, simply wash it off with water. It doesn’t need any scrubbing.
Rust stains from tile and grout are a massive issue for every house owner. We’ve described all the possible ways to get rid of tiles rust, and grout stains. You can try which seems suitable to you. And you can also follow a routine regime of cleaning the tiles. Always keep the tiles clean so that any stain can hardly form onto them.