How to Clean Grout on Tile Floors with Hydrogen Peroxide

A grout is an element that is commonly found on walls and floors. It is a finishing element placed between tiles to make them look even. In most instances, grouts are mostly used to fill spaces and make tiles water resistance. They can also be used for decorations.

Removing grouts on tiles is not an easy task as they lie slightly below the tile surface. This requires you to clean the grout using a much stronger detergent frequently. Using a base of hydrogen peroxide mixed with a cleaner gives room for the grout on the tiles to look fresh.

How to Clean Grout on Tile Floors with Hydrogen Peroxide

How to Clean Grout on Tile Floors with Hydrogen Peroxide

Moisturize the grout area: You should always start by spraying hot or warm water on the tile between the tiles. Then also remember to clean the grouts. You should put in mind that the water should be sprayed directly on the grouts sealing lines. This gives room for the areas to be moisturized perfectly.

Warm or hot water has a great impact as it leaves the areas shiny and clean when used. After spraying, scrub the grouts using a stiff brush that has bristles. If you don’t have a stiff brush, you can improvise one by using an old toothbrush to scrub. Scrubbing removes grime or dust particles that deeply attached to the grout. You can also use a steam cleaner if you got one.
Make a cleansing solution using hydrogen peroxide: You have to mix a base of hydrogen peroxide to make a great cleansing solution. You can also mix it with baking soda for effective results. The mixture removes dust and dirt from the grout.

First, start by mixing hydrogen peroxide and baking soda, then add some amount of liquid dish soap into the mixture. The soap will be of a high advantage in areas that are greasy or have oily substances. You can also add some vinegar as it plays a vital role in removing hard stains on the grouts.

Use the hydrogen peroxide mixture: After making the mixture, you can now apply the mixture on gout sealing lines. Always remember to allow the mixture to sit for 10 or 20 minutes on the grout lines. This gives time for the detergent to wash and remove tough stains on the grouts.

It is advisable to let the mixture stay long on the lines or rather give it enough time. This is because when the mixture stays long, it smoothens the dust and dirt on the grout lines and gives you an excellent result.

Scrub using a stiff brush: After 20 minutes, you can now scrub the gout area in circular motions. This helps you to remove the dirt from the grout pores easily. Sometimes it’s is not an easy task to remove the dirt from the gout pores but always try to ensure that you completely remove all the dirt from the pores. If you are having problems removing the dirt or the dirt is stuck in between the lines, you can approach specialists to avoid damaging the tiles.

Finally, wash the area: This is the most crucial and essential part, and you should never skip this step. Washing and cleaning neaten your tile surface. This also gives your tile a fresh shiny look.

Mostly washing is done using a piece of cloth. After scrubbing the grouts, mix some amount of hot water and liquid dish cleanser into a bucket. Then dip a clean cloth or a sponge in the bucket and wipe thoroughly on the surface of the grout. This cleaning procedure leaves your tiles flawlessly clean.

How To Make a Grout Cleaner Out Of Hydrogen Peroxide

Making a grout cleaner depends on your preferences. There are a lot of different recipes for grout cleaners. You can offer to choose one of the ingredients to add into your grout cleaner. Such ingredients include vinegar, liquid dish soap, and ammonia.

Making a grout cleaner is not a hard task. Here are some of the steps to consider when making a gout cleaner out of hydrogen peroxide. First, you will need a half a cup of baking soda, a quarter cup of hydrogen peroxide and one teaspoonful of liquid dish soap.

First, when preparing this grout cleaner, always ensure that you wear gloves. This is because the hydrogen peroxide can sting when it comes to contact with open cuts on the hands. Then put the baking soda into a small top squeezed container. After this, add some amount of hydrogen peroxide into the same container.

It may seem an easy task, but always make sure that you are careful when handling this mixture. After the addition of the hydrogen peroxide, add the liquid soap dish into the same bottle. Close the bottle and shake the bottle thoroughly to ensure that the ingredients mix properly.

Use a spray bottle and add the mixture into the spray bottle. Spray the mixture onto the grout lines and let it so stay. Then use a sponge of a piece of clean cloth to wipe it off. Although in the cleansing process, the procedure is similar to the one above. This kind of cleanser is perfect for removing mild dirt that is buildup on grout.

Making your preferred grout cleaner becomes easy to make since most ingredients used are common ingredients found in our houses. Also, remember that you can add some oils to your recipe if you want to achieve pleasant and antibacterial properties.

Your May Like
How to Clean Floor Grout without Scrubbing?
How Long Does Grout Take To Dry?
Best Steam Cleaners for Grout
Best Mop for Tile Floors

Conclusion

By nature, grouts are notoriously stubborn to clean as they hold the dirt. Be cautious of the methods you will use to clean the grout as most of the methods are promising. Now you know that how to  lean grout on tile floors with hydrogen peroxide. However, after trying them out, you will find that that the grout looks as new as before.

Finding the right cleaning solution starts with you, determining the right grime in your grout. Some experts recommend that you should avoid acidic cleaners such as vinegar. This is due to its high acidic value that can dissolve the element in the grout and etch the surrounding tiles. This can lead to serious problems than just having the dirt on the grouts.

Leave a Comment

Your email address will not be published.