The nozzle of a steam mop stops emitting steams when it gets clogged. You can release the block effortlessly and bring back the mopping performance again.
However, cleaning the nozzle and removing the clogged will be a nightmare for many of us.
It will be more frustrating for the Shark steam mop users as the manufacturer doesn’t provide any guidelines on cleaning the nozzle.
So, they leave the cleaning process and find buying a new one more effortless.
Fortunately, cleaning the nozzle on the Shark steam mop is quite easy.
In this cleaning guide on how to clean nozzle on Shark steam mop, we will break down every step to release the clog. In return, you don’t need to purchase a new nozzle.
- 1 Reasons Why the Shark Steam Mop Nozzle Get Clogged
- 2 How to clean the nozzle on Shark steam mop?
Reasons Why the Shark Steam Mop Nozzle Get Clogged
Before knowing the cleaning steps, first, let’s learn why your nozzle malfunctioned and stop emitting steam.
Using the hard water from the faucet is the reason behind clogging or blocking the nozzle. Hard water contains limestone and minerals.
When you steam, just the water is steaming and the mineral remains there. Over time, the remaining mineral forms a build-up and blocks the nozzle.
The best way to get rid of this issue is by using distilled water from your tank.
Indeed, avoiding the hard water for steaming will be the best trait to stop your nozzle from clogging.
How to clean the nozzle on Shark steam mop?
From the above step, you learn the reason behind clogging the nozzle. Now, it’s time to learn how to release the block. In this chapter, we will introduce you to two cleaning methods to unblock the nozzle.
Make sure you have the following equipment at your fingertips.
- Soft cotton pads
Unplug your unit from the nearby outlet and let it cool. Then, empty the water tank of your steam mop.
Use your screwdriver and detach or disassemble the unit. Then, simply put out the nozzle from the base.
You can see the build-up around the nozzle. So, use the soft cotton pad and wipe the residue down to clean. Then, wash away the nozzle with the solution of vinegar and water.
If the mineral buildup is inside the nozzle, use the paperclip and start pushing it forward and backward to break the debris.
Fortunately, Shark offers a device or nozzle cleaner to clean the nozzle. Using it, you can easily release the block.
This is a time-consuming method to clean the nozzle but it also works like a charm. The sweet part of this process is- you don’t need to disassemble the unit.
First off, make a solution of vinegar. Make sure you use 50% of water and vinegar to make the solvent.
Then, pour the solution inside the water tank of your Shark steam mop.
After pouring the solution inside the water tank, give it 24 hours to sit.
After the next day, plug your steam mop into a nearby electric outlet. Then, bring it over the sink.
Next, set the steam speed at the highest setting. Finally, turn the unit on for a burst of steam. It will break the residue inside the nozzle and bring them out.
We hope your Sharp Mop will steam fine as it did work for us too.
Bonus Tips: How to clean the Shark Steam Mop Pads
The best way to clean your Shark steam mop pads is by dipping the pad into the hot water for a few minutes. Then, squeeze the pad to remove the dirt from the pad. We recommend you use bottled water as the hard water of your home will affect the soft pad. Finally, rinse and air dry the pad.
Secondly, you can also machine wash the pad to evenly clean the pad.
Thirdly, make a solution of vinegar and detergent and soak your pad into the solvent. Lastly, rinse the pad thoroughly.
How do you take apart a shark steam mop head?
Removing the Shark steam mop is simple. Just click on the Head Release Button at the bottom of this unit. Then, pull the unit to take apart the shark steam mop head.
What is the best way to clean a mop head?
Make a solution of clean water and bleach by pouring it into the bucket. Then, sock your steam mop head into the solution and leave it for 10-15 minutes. Lastly, rinse with clean water.
Why is my floor steamer not steaming?
Nozzle blockage is the main reason that stops your steam mop from steaming. And you can get rid of this issue by following the two cleaning methods we discussed in this guide.
Throughout this guide, we focused on how to clean nozzle on the Shark steam mop.
Following the two methods, you can efficiently clean the nozzle by releasing the block inside it.
If you are in a rush, you can try out the first method. It takes you only 10-15 minutes to unblock the nozzle.
On the other hand, if you feel uncomfortable disassembling the unit, you can opt for the second method.
Now, it’s up to you.
Which methods are you going to try out to release the clogged? Let us know by stopping in the comment box.