7 Effective Tips On How to Clean Shower Tiles Without Scrubbing

Cleaning the shower tiles doesn’t only, keep your bath tiles shine but also, safe from several health issues.

Most of us scrub the tile with a brush and a bucket of water. But the traditional scrubbing process is time-consuming and requires so much effort. As a result, you will feel pain in your hands, shoulders, or arms.

So, is there any simple way to clean the tile efficiently without suffering any pain?

In simple words, how to clean shower tiles without scrubbing?

In this guide, we let you know 7 DIY cleaning methods that help you to clean the shower tiles with minimum effort.

The best part is- we also elaborate on whether those tidying up processes safe for your flooring or not.

How to Clean Shower Tiles Without Scrubbing

So, let’s get started right here.

7 Easiest Cleaning Methods to Wash Away the Shower Tiles Without Scrubbing

Try out the following easy-to-cleaning processes to tidy up the tiled flooring without any pain in the hand or shoulders.

  1. Use dishwashing soap and white vinegar

Make a DIY cleaning solution mixing 12 ounces of dishwashing soap and white vinegar. Then, heat them for a while in the microwave.

Afterward, dump the solution into a spray bottle and shake it to mix them properly. Now, spray the cleaning formula on the tiles effectively. It works like a charm to remove the regular spot.

However, if there is sticky dust in your grout line, we recommend you make a formula by mixing baking soda and hydrogen peroxide. Then, leave the solution for a few minutes to set it on the tile. Finally, wash the tile with clean water to remove the embedded dirt.

  1. Use a soft cloth and baking soda

Cleaning grout lines and tub areas are challenging. But applying the baking soda with a cloth on the tile lets you tidy up the floor effortlessly. Even you can get rid of limescale and stuff from the shower.

To eliminate dust and debris, set the baking soda on the tile by weeping down the tile. Then, let the baking soda dry by leaving it for a few minutes.

Finally, rinse the area to suck away that sticky limescale. The best part is- applying this method, you can get rid of everything, even dark spots without scratching the tile.

  1. Use the cleaning formula of vinegar and dish detergent

Firstly, pour a cup of vinegar and liquid dish detergent into a clean spray bottle. Then, shake the bottle gently to mix those ingredients properly.

Next, spray the DIY solution on the tiles evenly. Let it dry by leaving it for an hour.

After an hour, wash the tiles thoroughly with clean water to eliminate the crud and make your tile shine.

Many of us think vinegar is harmful to the tiled floor. But when you use it with water and wash the surface with clean water evenly, it will cause no damage.

  1. Try out the solution of hot water and Clorox

If there is mildew in your grout lines, then applying this cleaning process will be the best.

To remove the hard-to-eliminate dirt, make a cleaning formula mixing hot water and Clorox in a bucket. The ideal percentage of bleach will be 25%.

Then, use a grout brush to scrub the disgusting dirt off. The bleach works like magic and stops the mildew bring back again.

If the mildew doesn’t remove from the floor, you can use the bleach directly by making a paste with toilet paper. Then, wearing rubber gloves, squish it on the mildew spot.

Afterward, leave it for 12 hours. Finally, wipe off the paste and rinse the tile and grout line to eliminate those crud.

However, bleach is a type of harsh chemical. You can’t use it on every type of tile. It will fade the color of your tile flooring if you fail to handle it properly.

  1. Try the paste of baking soda & bleach

You can also use the cleaning solution made of baking soda and bleach. 

Just mix the baking soda and bleach and make a paste. Then, using an old toothbrush, apply the paste on the grout lines or the tiles.

Wait for a few minutes to let it dry on the shower surface. Finally, wash the spot with clean water to eliminate the dirt and dust from the tile.

However, we recommend you to use the bleach in the right proportion. Otherwise, it may damage the protective coatings like porcelain tile(how to clean porcelain tile shower without damaging the coatings).

  1. Clean with Hydrogen Peroxide and Borax

Because of the alkaline nature of borax, it is efficient to clean all sorts of dirt from shower tiles. At the same time, Hydrogen Peroxide performs the best when every cleaning solution fails to tidy up the bath.

Now, let’s see how you can use these ingredients to wash away dust from tiled flooring.

Firstly, spray borax on the tiles and let set by leaving it 5-6 hours. Then, wipe it away from the surface.

Secondly, spread the hydrogen peroxide on the tiled floor and let it dry for 2 hours.

Finally, rinse the tiled base (use warm water).

  1. Try out Magic Eraser

The easiest way to remove stain or debris from tile flooring is by applying a magic eraser.

Before using the magic eraser, first, vacuum the floor evenly and let it dry. Then, use the cleaner on the spot that has mildew or crud.

Afterward, leave it for a few minutes to dry it. Finally, wash the tiled flooring with warm water.

The issue associated with the magic cleaner is- it is made of harsh chemicals. So, it may damage the finish of your delicate tiled surface.

What You’ve Been Missing

Steam Cleaning Travertine Floors
Does Laminate Flooring Need to Acclimate

Final Words

So, how to clean shower tiles without scrubbing? I hope you find the right solution to this problem.

We broke down seven simple DIY cleaning methods to wash the tiled floor efficiently.

Every cleaning process we discussed above is practical and work. So, you can try out any of the tidyings up solutions.

However, we recommend you to try to use dishwashing soap and white vinegar. These two ingredients are completely safe and efficiently clean the tiled floor.

Besides these methods, you can also use a steam mop to wash the shower tiles effortlessly.

Leave a Comment

Your email address will not be published.