Well, engineered hardwood floors have recently created lots of buzz among amateur homeowners as they are affordable, easy-to-install, and do not require a lot of upkeep than the traditional ones. That’s elegant!
But, you still must know a few things about the maintenance of your beautiful and expensive engineered floors. And, one of such things is if you can safely use swiffer wet on your engineered wood floors or not, which is also one of the most-asked questions coming up from most engineered wood floor owners like you.
Worry not! Just read along the article till the very end to know the best possible answer to this question.
Nice to know: Swiffer wet is a moist mop using 2 types of cleaning solution. While the first one cleans dust and grime, the second type helps disinfect your floor and keep the floor cleaner for a long period of time.
Contents
Can I Use Swiffer Wet On Engineered Hardwood Floors?
Of course! Swiffer Wet can safely be used on your engineered wood floorings because they aren’t super absorbent. The Swiffer Wet is actually one of the best tools for cleaning engineered wood floorings.
You would also be glad to know that swiffer wet is approved for cleaning all finished hardwood floors. But, when you consider using swiffer wet on your engineered floor, make sure the water isn’t too hot or too cold for the floor, otherwise it could pose a great threat to the floor.
Moreover, some of the cleaning solution might contain acids that may react with your wood planks unfavourably. Hence, be very cautious while you apply any sort of solution on the floor.
Remember, if your engineered hardwood floor is moderately dirty, that’s only when you should mop the mess lightly. Either the Swiffer Wet-Jet or a similar product can be used to ensure the best clean possible.
While you use the Swiffer, choose to use the spray button sparingly and press down on the mop firmly so that you can clean up any stuck-on dirt or grime without using excessive moisture.
Plus, swiffer dry and wet refills are great alternatives for picking up any loose dirt or handling those stubborn stuck-on spots.
The swiffer wet can break up the tough and sticky messes with just the right amount of solution, and can also bring out the natural beauty of the engineered floors without damaging them.
Also remember that, if you’ve got dogs and cats in your house, there is nothing to worry about. Because Swiffer Wet mops are safer to use in houses if you can keep your pets from walking on the wet floor or ingesting the solution.
Though the solution is not toxic, it might cause stomach pains or skin irritation to the animals.
Some Additional Tips For Your Favorite Engineered Wood Floorings
Mind you, cleaning engineered wood floors is easier than cleaning solid hardwood floors. But why? Because the wood veneer is just a veneer.
Though cleaning engineered wood with Swiffer Wet isn’t hard at all, maintaining them requires special attention.
Carefully follow these instructions recommended below when you get to clean your engineered wood floors the next time. Carrying out the steps correctly will keep your floor safe for a longer period of time as well. So here we go,,,
- Sweep, clean and dry your engineered hardwood flooring regularly to keep mopping to a minimum and keep the surface from abrasive particles that can cause nasty scratches to the floor.
- Remember, a vacuum beater bar will most likely end up scratching and damaging your engineered wood planks. Therefore, you’re better off using a vacuum cleaner with a soft flooring attachment. Or, a daily sweep with a broom will do the trick, too.
- Plus, since microfiber is so effective for gathering dust and debris without posing any permanent threat to the floor surface, you can pick up dirt and dust from the floor by using a dry microfiber dust mop.
- Excessive water or liquid can cause severe damage to the flooring. That’s why you must wipe up the spills as soon as they occur. To avoid this, make sure you do not let any kind of liquid sit on the floor. Or, you can also dry mop with a clean cloth after washing the floor.
- Try to keep the rugs and mats at entranceways, because this will help to keep dirts, pebbles, moisture, debris, and grains of sand away from the floor and also help you avoid scratches on the floor.
As a result, the upper layer of your floor will be safe and intact for an extended period of time.
- Do not walk on your engineered wood floors with high heeled shoes or shoes with spikes, as they can severely damage the upper wear layer of the flooring.
- Harsh cleaners such as Wax-based cleaners and powerful detergents should be avoided to clean engineered hardwood flooring.
waxing could make your engineered wood floors look yellow, preventing you from recoating the flooring down the road. This is exactly why I recommend you to not use cleaners containing wax or oil.
Using a damp mop and an appropriate floor cleaner is the best way to clean your engineered floor. On the contrary, don’t use ammonia as well as other high-pH cleaners as they might cause damage to the finish.
As vinegar is also acidic and can hurt the finish, stay away from it. You can also consider using manufacturer-recommended liquid cleaners to get the best of results.
- If any leftover water is over there on your floorings after using any Swiffer products, make sure you wipe it up right off the bat with a clean cloth or towel to avoid warping or any further water damage.
Frequently Asked Questions (FAQs):
Can I steam clean engineered Hardwood floors?
Steam mopping uses hot water that can let the moisture seep through the floor, compromise the construction of the planks, and cause engineered wood planks to warp eventually. For this reason, steam cleaning is not recommended when it comes to caring for engineered wood floors.
But if you want to replace your flooring every few years, you can go for steam cleaning. Otherwise, it is not an appropriate method of cleaning for this type of wood floor.
How long do engineered hardwood floors last?
The engineered hardwood floorings are one of the most heavy-duty floorings. Depending on the thickness of the plank, the lifespan of engineered flooring can be somewhere between 40 to 80 years if it is properly cared for and maintained.
Remember, the thinner types have approximately 20 to 30 years of lifespan, and the thicker ones can last for around 40 to 80 years. Because it is made from multi-layer ply core and real wood veneer.
What floors can you use Swiffer wet on?
Besides engineered hardwood floorings, swiffer wet is also designed to be used on the following floor surfaces:
- Vinyl plank flooring.
- Finished hardwood.
- Porcelain tiles.
- Laminate flooring.
- Ceramic tiles.
- Finished bamboo.
Can engineered hardwood get wet?
Your expensive engineered wood floorings shouldn’t sit in moisture for a longer time after any kinds of spills and accidents happen. You have to clean up excess moisture from the floors as soon as possible. If it’s not done promptly, moisture will continue to seep through your planks to the subfloor and cause the planks to warp.
Is Bona safe for engineered wood floors?
Yes, cleaning both the engineered wood floors as well as solid hardwood floors with the BONA spray is very effective and also a safer way of cleaning.
Why is my Engineered Hardwood floor sticky after Swiffer?
If you use more cleaning solution than needed during your daily clean-up process with swiffer wet, then your engineered wood floor will be left feeling sticky. So, use the right amount of solution, avoid overusing.
Final Words
Well, that’s all there is to it, people. You’ve just got a clear understanding on whether or not you can use swiffer wet on your engineered hardwood floor.
To wrap it all up, it’s absolutely safe to use swiffer wet on an engineered wood flooring as long as you follow the aforementioned suggestions. If you’re still confused, then read through the whole article again.
Thank you so much for dropping in today, you guys are the bee’s knees. Have a nice day!!!