Acrylic tubs are quite popular now for their shiny look. They give a touch of sophistication to your bathroom.
However, over time, the sparking look or its shine becomes dull if you don’t clean it effectively.
Yes, there are cleaners you can find in the market for tidying up the acrylic tubs. But the heck is- acrylic materials get damaged by scratching easily.
If you don’t use the right cleaner, it will lose the glittering look or damage its shine. So, what cleaners can be used on acrylic tubs? In this guide, we let you know the cleaners you should use to clean the acrylic tubs. The best part is- we also cover how to clean tubs made of acrylic materials.
Contents
What Cleaner Products You Can’t Use
Before knowing the recommended cleaners for acrylic tubs, learn about what products shouldn’t be used.
In this way, you can easily avoid those cleaning agents that scratch your delicate tub materials.
We recommend you to avoid all types of chemical cleaners to tidy up your bathtub. They don’t only scratch the tub but also damage the finish in the long run.
Also, make sure you don’t use any abrasive scrubbing brushes, pads, or sponges. Otherwise, the delicate tubs lost their finish and shiny look.
You must avoid these cleaners by all means for cleaning acrylic shower or bathtub:
- Avoid every type of solvent like acetone, mineral spirits, turpentine, paint thinner, and others
- CLR® and Lime-A-Way®
- Lysol® with hydrogen peroxide cleaner
- Scrubbing bubbles
- Tilex® Bathroom Cleaner
Cleaners We Recommend To Use
Removing hard water deposits from the tub is a daunting task. However, if you have the right cleaning product in your hand, you can effortlessly but safely clean the acrylic tub.
First off, we recommend you to try out the natural and DIY cleaning ingredients.
The best part of using DIY cleaners is- they are safe. And they don’t bring any damage to your acrylic shower tub.
Here are some DIY and household materials you can try:
- Baking soda
- Liquid dishwasher or detergent
- Bleach
- Lemon
- Vinegar
- Soft sponge
- Soft scrubbing brush
- Rubber gloves
You can also try out the following non-abrasive cleaners to brush up your shower tub. They can be found easily on Amazon.
- Bio-Clean Professional Windshields
- Scrub-free Bathroom Cleaner
- Tilex Daily Shower
Another best way to know what cleaning agents or products will be best for the tub is by checking the manufacturer’s guidelines.
Every bathtub manufacturer recommends a cleaner that will be safe for their products.
So, read the instructions and go for the cleaner to clean your acrylic shower tubs safely but evenly.
How to Clean Acrylic Shower Tubs Safely?
Because of regular use, there are a lot of stains on the shower tub. Applying the right cleaner you can easily get rid of stains, spots, and hard water deposits.
From this chapter, you can learn the effective but safe way to clean your acrylic shower tub.
Try out soft scrub
Soft-scrub is the best way to remove stains or spots from your acrylic tubs. Using it, you can effortlessly scrub away dirt, debris, and black spots from the tub.
It will be better by making a combination use of soft-scrub, elbow grease, and a scrubber sponge.
However, you can apply Bar Keeper’s or Ajax powder for tough stains to remove from the bathtub.
Paste of Bleach & Baking Soda
Getting rid of soap scum or stain will be effortless by applying the paste of baking soda and bleach.
First off, make a paste blending equal parts of bleach and baking soda. Then, paint them on the shower tub and leave it for 2-3 hours to sit.
After that, take a bucket of hot water and use a scrubbing brush. Then, scrub away the affected area until the stain disappears completely.
Finally, rinse the tub with clean water.
Solution of Vinegar & Water
You can also remove stains from the acrylic bathtub by applying the solution of water and vinegar.
To make a solution, pour water and half part of vinegar in a spray bottle. Then, spray the solution over the affected area. As vinegar is a mild acid, it cuts through the dirt and oil level.
Next, use a soft scrubbing brush to scrub the tub area. Lastly, wash away the shower tub with clean water.
Liquid Dish Soap
Using liquid dish soap is another excellent way to remove black spots or stains.
To do that, just apply a fair amount of soap inside the shower. Next, leave it for 10-15 minutes to soak or sit properly.
Then, use a washcloth to wipe down the tub area evenly. And finally, wash away the shower tub with clean water.
Solution of bleach & water
First off, pour a gallon of water in a bucket and 1-2 cups of bleach. Then, blend them properly.
Secondly, dip a non-abrasive sponge into the solution and gently wipe away the tub area. Continue to do this task until every spot from your tub area disappears.
And lastly, wash away the tub area with warm water to clean and sanitize your shower tub.
Conclusion
I hope you find this guide on what cleaners can be used on acrylic tubs helpful. In this guide, we covered everything about cleaning your acrylic shower tub.
And the best part is- we described what cleaners you should apply and what you shouldn’t. Also, you can use above methods to clean both acrylic and porcelain bathtub.
Now, it’s your time to grab the right cleaner and go for cleaning your shower tub!!