Let’s begin with a bitter truth!
Deciding between hub floor vs drain might be a tough job if you are unsure about the usability.
You may require a proper drainage system for your internal residential surface and landscape or for protecting your commercial equipment from potential damage.
So you must have a clear idea about these two kinds of drainage systems mentioned earlier.
Hub drain is perfect for industrial and commercial areas where indirect disposal of liquid waste is desired. And floor drain performs well when it comes to removing standing water or liquid nearby from a particular surface especially during the occurrence of flood.
Let’s move on to the next section to have more clear insights.
What you’ve been missing
Water Coming Up From Basement Drain After Rain
Ceramic Or Porcelain Tile For Kitchen Floor
Basement Floor Drain Backs up When Toilet is Flushed
Contents
Fix Your Need Before Making Any Choice
At first, you must assess your need before selecting and installing any kind of drain. And this assessment includes approximate evacuation of water and other liquid to the drain and the traffic the area might get. Let us clear this with an instance.
If you want to install any particular drainage system in your garage, you will need to think about potential flooding and the capacity of removing standing water in this area. Furthermore, you must consider how many times your vehicle may pass over the head of the drain.
The main differences between these two widely used options mainly lie in the installation section and connection to the plumbing system.
Hub Drain
You can best understand a hub drain by addressing the part of the pipe that has a hub. There are female and male ends in every pipe. As the female end is the broad connector end, its characteristic structure is often referred to as a bell.
Hub drains are connected to other lines and you can use them with or without strainer baskets according to your drainage needs.
A hub drain primarily serves the purpose of removing indirect liquid waste. It comes standard and can be used with floor sinks, trench drains, catch basins, and sanitary drains.
The installation of hub drains is a breeze as the width of the connector pipe and the inner diameter of the hub pipe are always the same.
You can attach the hub in various ways, such as by using a rubber gasket or joining them with solder.
Floor Drain
A floor drain is a hole at the lowest point of a surface that is covered with a grate to remove still water near it. Its shape is generally round, but can also be rectangular and square. Floor drains have metal or plastic gratings.
Floor drains guide water and other liquid waste into the drain and remove them inside the wall of the room. To let the water flow to the drain smoothly, the floor around the drain is also sloped.
While installing, you must ensure to place a strainer securely over the floor drain in order to prevent the entrance of foreign objects, the formation of unwanted pests, and accidents.
Don’t forget to check if the stainer is smooth enough. Otherwise, objects like hair can clog the drain by getting stuck.
Comparison Table
For getting a clear vision of these two types of drains precisely, we have created this table. Hope this will help you to have a quick look over the distinctive parts.
| Point of Comparison | Hub Drain | Floor Drain |
| Installation | Relatively hard, requires much effort and knowledge. | Quite easy. |
| Ideal place | Ideal for commercial places like the food industry, steel industry, etc. | Ideal for residential properties like kitchen, bathroom, or living room. |
| Hiring professionals | It Requires hiring professionals as specialized knowledge is needed. | It Doesn’t need any professionals. A Non-professional can install it without any trouble. |
| Cost | Based on types and needs, Installation and repair costs can be a little bit higher. | Installation and repair cost is comparatively low. |
| Purpose | Its main purpose is to remove liquid waste indirectly. | Its main purpose is to wash out water and other liquid directly to the drain. |
| Position | Hub drains are generally used on the above ground. | Floor drains are generally used underground. |
| Appearance | Since a hub drain is visible, its appearance matters. | Since the floor drain is not visible, its appearance doesn’t matter. |
| Functionality | Hub drains have several lines to run into the drain. | A floor drain is designed to evacuate all still water around the entire surface to a specific direction. |
| Grating | No grating is compulsory. | Grating is required to function properly. |
FAQs
Does a hub drain need a vent?
Yes, a hub drain needs a vent. Since the floor drain is designed for draining the floor, it can be used to drain a particular piece of equipment, If the floor drain is used for equipment drainage, then the hub drain won’t be used.
What is the difference between a floor drain and a floor sink?
Floor drains are usually smaller than most of the floor sink. A floor drain is a plumbing fixture that works to wash out water near it whereas a floor sink acts as a waste receptor.
Commercial restaurant appliances which require air gaps are ideal for floor sinks. And floor drains are ideal for kitchen, bathroom, laundry room, etc.
What is no hub plumbing?
No hub plumbing is a process of transferring maximum pressure to the pipe and gasket from the clamps by a patented shield design. Its main purpose is to replace the less efficient spigot and hub by connecting with the application of no-hub cast iron pipe.
Final Thought
As there are many options out there, you must be careful while choosing the best type of drain to meet your needs.
And for that, We have discussed the basics of hub floor vs drain floor to help you make the right decision.
But if you are still unsure and doubt any part, then contact a professional plumber to have peace in your mind and install a proper drainage system for your needs.